牌号简介 About |
---|
微波MP564189具有良好的刚度和低温韧性。典型应用包括垃圾桶、工业容器、家庭用品和玩具。MP564189是16目粉末,也可提供颗粒形式的Petrothene GA564189。MP564189符合食品药品监督管理局21 CFR 177.1520的要求。本法规允许在“…与食品接触的物品或成分或物品中使用该烯烃聚合物。”具体限制或使用条件可能适用。 MICROTHENE MP564189 exhibits good stiffness and low temperature toughness. Typical applications include trash cans, industrial containers, housewares and toys. MP564189 is 16 mesh powder and is also available in pellet form Petrothene GA564189. MP564189 meets the requirements of the Food and Drug Administration 21 CFR 177.1520. This regulation allows the use of this olefin polymer in" ...articles or components or articles intended for use in contact with food." Specific limitations or conditions of use may apply. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.924 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
20 | g/10min | ASTM D1238 |
螺旋流动长度 Spiral flow length 2 , 3 |
32.1 | cm | 内部方法 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
45.0 | ℃ | ASTM D648 |
脆化温度 Embrittlement temperature |
< -76.1 | ℃ | ASTM D746 |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
ASTM D638 | ||
屈服 yield 4 |
MPa | ASTM D638 | |
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 4 |
|||
屈服 yield 4 |
% | ASTM D638 | |
弯曲模量 Bending modulus 5 |
ASTM D790 | ||
1% 正割 1% secant |
MPa | ASTM D790 | |
2% 正割 2% secant |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 熔体温度: 440°F, 注塑压力: 1.00E+3 psi |
3 0.625 in |
4 20 in/min |
5 0.50 in/min |
【新闻资讯】查看全部
中科炼化优化操作降低乙烯装船能耗
2021-10-27 搜料网资讯: 中科炼化通过优化低温乙烯装船操作,控制管线预冷时间及提高乙烯外送量,每次装船减少乙烯制冷量约20t,调整匹配BOG制冷压缩机负荷,大幅降低了乙烯装船过程中的能 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |