牌号简介 About |
---|
HP-2150A是一种高性能聚醚型聚氨酯弹性体,适用于手工批量加工。无需使用汞、MOCA或MDI,室温固化即可获得优异的物理性能。 HP-2150A is a high performance polyether based polyurethane elastomer formulated for hand-batch processing methods. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or MDI. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
Hardener Hardener |
0.990 | g/cm³ | |
固化处理 Curing treatment |
1.04 | g/cm³ | |
基体树脂 Matrix resin |
1.08 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 到 0.50 | % | ASTM D2566 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
按重量计算的混合比: 100 按容量计算的混合比: 100 | ||
硬化法 Hardening method |
|||
脱模时间 stripping time |
min | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
粘度 viscosity |
|||
25℃ 25℃ 2 |
Pa·s | ||
25℃ 25℃ 3 |
Pa·s | ||
25℃ 25℃ 4 |
Pa·s | ||
固化时间 Curing time |
|||
25℃ 25℃ |
hr | ||
胶凝时间 Gelation time |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
撕裂强度 tear strength |
kN/m | ASTM D624 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Hardener |
3 Mixed |
4 Resin |
【新闻资讯】查看全部
乙烯在建项目落成 民企涌入改动中国市场格式
2017-05-10 在新一轮以民营化企为主掀起的乙烷裂解项目投资热潮的当儿,企业也因利润等驱动而大举布局实施煤化工和石化烯烃项目。 亚化咨询预计,到2021年,中国乙烯产能将达到3700万吨,当量需求将达到4400万吨左右,当量缺口约为1500万吨,届时中国乙烯市场依然存在巨大缺口。随着拟在建项目的落成,继煤/甲醇制烯烃之后,中国的乙烯市场格局迎来了又一场巨震。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |