牌号简介 About |
---|
Evoprene标准系列主要基于SBS(苯乙烯-丁二烯-苯乙烯)嵌段共聚物,而不是氢化SEBS型。这是一种成本较低的聚合物,因此与Evoprene G或GC等级相比,这些等级的聚合物通常成本较低。SBS是SBR橡胶的嵌段共聚物,其性能与其硫化同类橡胶的性能基本一致。由SBS嵌段共聚物生产的化合物适用于各种应用,包括挤压门、窗和家具密封件、摩擦条、垫子、缓冲块、索环、衣架垫、玩具组件等。化合物在极低温度下保持柔性(-60°C,-75°F),可在+55-60°C(130-140°F)下使用。从20年代中期的肖氏硬度A到60肖氏硬度D范围广泛。许多化合物都具有良好的耐臭氧性,但尽管色素黑色等级可用于外部应用,但非黑色等级会很快变硬并在外部变色。 The Evoprene™ Standard series is based mostly on SBS (styrene-butadiene -styrene) block copolymer rather than the hydrogenated SEBS type. This is a lower cost polymerso these grades are generally available at reduced cost compared with the Evoprene™ G or GC grades. SBS is the block copolymer form of SBR rubber and the properties generally mirror those of its vulcanisable cousin. Compounds produced from SBS block copolymer are suitable for a wide range of applications including extruded door, window and furniture seals and rubbing strips, mats, bump stops, grommets, coat hanger pads, toy components etc. Compounds remain flexible to very low temperatures (-60°C, - 75°F) and can be used at up to +55 - 60°C (130 - 140°F). A wide range of hardnesses is available from the mid 20s Shore A to about 60 Shore D. Many compounds are formulated for good ozone resistance but whilst grades pigmented black can be used for external application non black grades will quickly harden and discolour outside. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.00 | g/cm³ | ISO 2782 |
收缩率 Shrinkage rate |
0.050 to 1.2 | % | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
4.40 | MPa | ISO 37 |
100% 应变 100% strain |
0.800 | MPa | ISO 37 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
1000 | % | ISO 37 |
撕裂强度 tear strength 2 |
kN/m | ISO 34-1 | |
压缩形变 Compression deformation |
|||
22℃,72 hr 22℃,72 hr |
% | ISO 815 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ISO 868 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
M-S Flow M-S Flow |
MPa | Internal Method | |
耐臭氧性 Ozone resistance 3 |
Internal Method |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 B 方法,直角形试样(不割口) |
3 100 pphm, 20%str |
【新闻资讯】查看全部
消费税改革或扩围 塑料袋等资源型产品归入纳税范围
2016-07-04 营改增试点从5月1号全面实施之后,消费税如何改革成为新的关注焦点。昨天,有消息称“消费税可能将扩大征税范围”。 作为税制改革的一项内容,本轮消费税改革方案的核心内容是调整消费税征收范围、征收环节和税率。引导人们消费方式的转变,加大对不可再生资源的保护,是未来消费税扩大税基的一个方向。因此,有消息说:一些损害环境的产品,包括塑料袋、农药和破坏臭氧层的电子产品等资源型产品,将会纳入征税范围。 公开资料显示,目前消费税征税范围包括 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |