牌号简介 About |
---|
我们的Weather-X ML200具有业内最高的美学、光泽度和深度,可能由3-5层组成,但通常由3层透明丙烯酸、有色丙烯酸和ABS组成。关键性能是表面硬度、耐化学性、耐候性、韧性和良好的成形性。应用:包括:房车、汽车、运输和海洋工业。加工:表面温度=325-350°F模具温度=150-175°F模具温度@170°F模具收缩率为.004-.008英寸/英寸。光泽度侧的烤箱加热器应比底材侧略低。在成形前,板材必须完全被热浸透。精加工:用丙烯酸改性钻头钻共挤板时,一定要从丙烯酸侧退出,但用标准钻头钻时,一定要从基片侧退出。为了准确和安全,在钻孔时应夹紧丙烯酸盖片。对于使用CNC或空气路由器切割/修剪Weather-X ML 200板材,可使用标准硬质合金玻璃纤维切割机-金刚石切割工具。在CNC环境中,零件的布线最好使用断路器类型的硬质合金刀具。请与Primex塑料公司代表联系,了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理和功能:表面通常是高光泽的。颜色包括固体、花岗岩、珠光、漩涡、金属、软白色和同色异谱效应。 Offering one of the highest aesthetics, gloss and depth of image in the industry, our Weather-X ML200 may consist of 3-5 layers but is typically 3 consisting of clear acrylic, colored acrylic and ABS. Key properties are surface hardness, chemical resistance, weatherability, toughness and excellent formability. Applications: Include; RV, automotive, transportation and marine industries. Processing: Surface Temp = 325-350°F Mold Temp = 150-175°F De-mold @ 170°F Mold shrink is .004-.008 in/in. Oven heaters on gloss side should be somewhat lower than on the substrate side. The sheet must be fully saturated with heat before forming. Finishing: When drilling co-extruded sheet with an acrylic modified drill bit, be sure to exit from the acrylic side but when drilling with a standard bit, be sure to have the bit exit from the substrate side. For accuracy and safety, acrylic capped sheet should be clamped during drilling. For cutting/trimming Weather-X ML 200 sheet with CNC or air routers, a standard solid carbide fiberglass router -diamond-cut tool can be used. Routing parts in a CNC environment is best done with chip-breaker-type, solid carbide tools. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: The surface is typically high gloss. Colors include Solids, Granite, Pearlescent, Swirl, Metallics, Soft White and Metamerism effects. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.06 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.40 到 0.80 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
220 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
87.8 | ℃ | ASTM D648 |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
60° 60° |
85 | ASTM D523 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
De(mold Temperature) De(mold Temperature) |
℃ | ||
模具温度 Mold temperature |
|||
other other |
℃ | ||
Surface Temperature Surface Temperature |
℃ | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
Kordsa Teknik Tekstil收购英威达美国工厂
2017-07-13 纤维和布料生产商Kordsa Teknik Tekstil的美国分公司Kordsa收购了英威达位于美国田纳西州查特怒加的一家工厂。这家工厂目前是Kordsa公司的总部。去年英威达出售给兰蒂奇的众多项目中显然不包括这家工厂。鉴于不久将获批的反垄断,此项收购案应尽快完成。 Kordsa集团的复合材料部主要负责包括轮胎帘线在内的聚酰胺纤维和聚酯纤维。该部门近期宣布其将为汽车行业的A级曲面生产单项运动的新型快速固化聚酯胶片。这些聚酯胶片可将目前9分钟的循环周期缩减至3分钟。压塑过程 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |