牌号简介 About |
---|
Braskem PE SGF4960 SGF4960是一种均聚高密度聚乙烯,专为高密度、高刚度和高抗冲击性的吹塑段而开发。该等级的最低生物基含量为96%,根据ASTM D6866测定。应用:用于食品应用的瓶子,如乳制品和饮料;用于非食品应用的刚性容器,如化妆品和润滑油;通过压缩成型的盖子和瓶盖;用于制药应用的刚性容器(符合USP 33)。Braskem PE SGF4960描述:SGF4960是一种均聚物高密度POL。乙烯,开发用于高密度、高硬度和高抗冲击性的吹塑段。该等级的最低生物基含量为96%,根据ASTM D6866测定。应用:用于食品应用的瓶子,如乳制品和饮料;用于非食品应用的刚性容器,如化妆品和润滑油;通过压缩成型的盖和盖;用于制药应用的刚性容器(符合USP 33)。工艺:吹塑。 Braskem PE SGF4960 SGF4960 is a homopolymer high-density polyethylene, developed for the blow-molding segment with high density and stiffness combined with high impact resistance. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. Application: Bottles for food applications such as dairy products and beverages; Rigid containers for non-food applications such as cosmetics and lubricant oils; Caps & closures molded by compression; Rigid containers for pharmaceutical applications (complies with USP 33). Process: Blow Molding. Braskem PE SGF4960 SGF4960 is a homopolymer high-density polyethylene, developed for the blow-molding segment with high density and stiffness combined with high impact resistance. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. Application: Bottles for food applications such as dairy products and beverages; Rigid containers for non-food applications such as cosmetics and lubricant oils; Caps & closures molded by compression; Rigid containers for pharmaceutical applications (complies with USP 33). Process: Blow Molding. Braskem PE SGF4960 SGF4960 is a homopolymer high-density polyethylene, developed for the blow-molding segment with high density and stiffness combined with high impact resistance. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. Application: Bottles for food applications such as dairy products and beverages; Rigid containers for non-food applications such as cosmetics and lubricant oils; Caps & closures molded by compression; Rigid containers for pharmaceutical applications (complies with USP 33). Process: Blow Molding. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.962 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
ASTM D1238 | ||
190℃,2.16kg 190℃,2.16kg |
0.34 | g/10min | ASTM D1238 |
190℃,21.6kg 190℃,21.6kg |
28 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
50 ℃,2.00 mm,100%非离子表面活性剂,模压成型,F50 50 ℃, 2.00 mm, 100% non-ionic surfactant, molded, F50 |
25.0 | hr | ASTM D1693 |
Biobased Content Biobased Content |
96 | % | ASTM D6866 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,模压成型 Shaw's D, molded |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
断裂,模压成型 Fracture, molded |
MPa | ASTM D638 | |
屈服,模压成型 Yield, molding |
MPa | ASTM D638 | |
弯曲模量 Bending modulus |
|||
1% 正割,模压成型 1% cut, molded |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
模压成型 Compression Molding |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,模压成型 0.45 MPa, unannealed, molded |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 0.3 mm notched-plaques |
3 压 力1 (10N) |
【新闻资讯】查看全部
滨化股份上半年净利润9.75亿元 同比增长5492.42%
2021-07-24 搜料网资讯: 7月22日晚间,滨化股份发布2021年半年度业绩快报,公告显示:2021年1-6月营业总收入为43.19亿元,比上年同期增长58.75%;归属于上市公司股东的净利润为9.75亿元,比上年同 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |