牌号简介 About |
---|
SABIC LLDPE M200024 SABIC® LLDPE M200024为线性低密度聚乙烯共聚物注射成型级,分子量分布窄。其典型设计具有良好的低温韧性、抗应力开裂性(ESCR)和光泽。典型应用。注射成型:SABIC® LLDPE M200024通常用于需要高流量和快速循环的大型物品的注射成型,例如家庭用品、垃圾桶、汽车零件、盖子和大型工业容器。色母粒复合:SABIC® LLDPE M200024通常用于色母粒应用,如吹塑、注塑和薄膜挤出。可用于炭黑、二氧化钛或颜料含量很高的母粒。本产品不适用于任何医药/医疗应用,也不得用于任何医药/医疗应用。SABIC LLDPE M200024产品说明M200024为线性低密度聚乙烯级,分子量分布窄,适用于注塑应用。它被设计成具有良好的流动性能,具有低温韧性、抗应力开裂性和高光泽。典型应用M200024推荐用于家庭用品、垃圾桶、大型工业容器盖、汽车零件等。 SABIC® LLDPE M200024 SABIC® LLDPE M200024 is a linear low density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. It has been typcially designed to have good low temperature toughness, stress crack resistance (ESCR) and gloss. Typical applications. Injection Molding: SABIC® LLDPE M200024 is typcially used for injection moulding of large items where high flow and fast cycles are required such as for example housewares, trash cans, automotive parts, lids and large industrial containers. Masterbatch Compounding: SABIC® LLDPE M200024 is typically used for masterbatch applications like blow moulding, injection moulding and film extrusion. It can be used for for masterbatches with very high carbon black, titanium dioxide or pigment content. This product is not intended for and must not be used in any pharmaceutical/medical applications. SABIC® LLDPE M200024 Product Description M200024 is Linear Low Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good flow properties with low temperature toughness, stress crack resistance and high gloss. Typical Applications M200024 is recommended for housewares, trash cans, lids for large industrial containers, automotive parts etc. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density Density |
924 | kg/m³ | ASTM D1505 |
熔体质量流动速率 Melt flow rate Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
20 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR ESCR(Environmental Stress Cracking Resistance) |
|||
100%非离子洗涤剂 100% Igepal,模压成型,F50 100% non-ionic detergent 100% Igepal, molded, F50 |
24.0 | hr | ASTM D1693A |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Izod impact notched Izod impact notched |
|||
23℃,模压成型 23 ℃, molded |
540 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Brittleness temperature Brittleness temperature |
< -75.0 | ℃ | ASTM D746 |
维卡软化温度 Vicat softening temperature Vicat softening temperature |
℃ | ASTM D1525 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore Hardness Shore hardness |
|||
邵氏 D,模压成型 Shaw's D, molded |
ASTM D2240 | ||
拉伸模量 Tensile modulus Tensile modulus |
|||
1% 正割 1% elongation,模压成型 1% secant 1% elongation, molded |
MPa | ASTM D638 | |
拉伸强度 Tensile stress Tensile strength |
|||
屈服 yld,模压成型 Yield yld, molded |
MPa | ASTM D638 | |
断裂 break,模压成型 Break, molded |
MPa | ASTM D638 | |
拉伸应变 Tensile strain Tensile strain |
|||
断裂 break,模压成型 Break, molded |
% | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 压 力1 (10N) |
【新闻资讯】查看全部
西湖化工以12亿美元收购Hexion的环氧树脂业务
2021-11-25 搜料网资讯: 西湖化工周三表示,已达成最终协议,以约12亿美元的价格收购Hexion公司的全球环氧树脂业务。 该公司表示,通过这次收购(预计将在2022年上半年完成),西湖化工将通过 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |