牌号简介 About |
---|
一种可刷的高性能陶瓷填充环氧树脂,用于密封、保护和修复易受侵蚀、腐蚀和磨损的表面。预期用途:密封和保护暴露在腐蚀和腐蚀中的新设备;保护泵壳、叶轮叶片、闸门阀、水箱和风扇叶片;重建热交换器、管板和其他水循环设备;为修复表面提供特别光滑表面的面漆产品特征:批准用于M食用和家禽植物(仅限红色)具有优异的耐化学性,耐350°F的温度,使用短鬃刷或滚筒容易,低粘度,自流平液体。 A brushable, high performance ceramic-filled epoxy for sealing, protecting and repairing surfaces subject to erosion, corrosion and wear. Intended Use: Seal and protect new equipment exposed to erosion and corrosion; protect pump casings, impeller blades, gate valves, water boxes, and fan blades; rebuild heat exchangers, tube sheets, and other water circulating equipment; top coat for providing exceptionally smooth surface to repaired surfaces Product features: Approved for use in meat and poultry plants (red only) Excellent chemical resistance Temperature resistance to 350°F Applies easily with short-bristle brush or roller Low viscosity, self-leveling liquid |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.62 | g/cm³ | |
特定体积 Specific volume |
0.618 | cm³/g | |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 | % | ASTM D2566 |
固体含量 Solid content |
|||
by Volume by Volume |
100 | % | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电常数 Dielectric constant |
|||
1 MHz 1 MHz |
3.87 | ASTM D150 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Salt Spray Salt Spray |
month | ||
耐热温度 Heat resistant temperature |
|||
Dry Dry |
℃ | ||
Wet Wet |
℃ | ||
拉伸剪切强度 Tensile shear strength |
MPa | ASTM D1002 | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
hr | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
储存稳定性 storage stability |
|||
24 ℃ 24 ℃ |
min | ||
热固性混合粘度 Thermosetting mixed viscosity |
cP |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
美国增塑剂禁令出台 相关塑企遭到影响
2018-04-19 美国消费品安全委员会修订的《关于玩具和儿童护理产品中的邻苯要求》将于4月25日正式实施。此次修订主要针对联邦法案16 CFR 1307章节,对增塑剂(邻苯二甲酸酯)限制范围和要求进行修改。修改后,儿童玩具和儿童护理产品中实施强制性永久禁令的增塑剂将由现有的3种增加到8种,若产品中增塑剂含量超过1000mg/kg,将禁止在美国市场销售。这一新规对我国塑料玩具出口行业产生了很大的影响。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |