![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/downloads-img2.png)
公司信息及水印
![](/page/pc/images/result/downloads-img4.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img3.png)
牌号简介 About |
---|
Softell TKG 259N是一种紫外线稳定,20%玻璃纤维增强热塑性聚烯烃化合物注塑成型。这种非常低的翘曲等级是专为美观的汽车内饰应用而设计的。Softell TKG 259N结合了软触摸触觉,一个哑光表面,一个非常好的消音高刚度和良好的耐刮性。等级有颜色、颗粒形式。 Softell TKG 259N is a UV stabilised, 20 % glassfiber reinforced thermoplastic polyolefin compound for injection moulding. This very low warpage grade has been especially designed for aesthetical automotive interior applications. Softell TKG 259N combines soft touch haptics, a matt surface, a very good sound dampening with a high stiffness and an excellent scratch resistance. The grade is available in colour, pellet form. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.05 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
7.0 | g/10min | ISO 1133 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180 | ||
23℃ 23℃ |
40 | kJ/m² | ISO 180 |
30℃ 30℃ |
10 | kJ/m² | ISO 180 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
100 | ℃ | ISO 75-2/B |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ASTM D2240 , ISO 868 | ||
邵氏 D,3 秒 Shore D, 3 seconds |
ASTM D2240 , ISO 868 | ||
邵氏 D,15 秒 Shore D, 15 seconds |
ASTM D2240 , ISO 868 | ||
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ISO 178 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
试产医用膜料助力抗疫
2022-05-11 近日,中科炼化35万吨/年高密度聚乙烯装置成功试产茂金属医用膜料新产品M1830。该产品具有透明度高、晶点低、韧性好、加工性能更好等优点,能用于制作医用防护服,助力保供防疫 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |