牌号简介 About |
---|
聚醚酰胺Pebax® HD 5513 SA 01是一种热塑性弹性体,由柔性聚醚和刚性聚酰胺制成。加入PA6后,Pebax HD 5513 SA 01增强了PA6的性能,特别是在低温和低湿度条件下,同时保持了尼龙薄膜的透明度,改善了其柔软触感。这种SA等级是专门为食品用途设计的。请注意,该等级以前命名为Pebax MP 1878 SA 01。 Polyether block amide Pebax® HD 5513 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Added to PA6, Pebax® HD 5513 SA 01 resin enhances the properties of PA6, especially at low temperatures and low humidity content, at the same time maintaining the transparency of the nylon film and improving its soft touch. This SA grade is specially designed to food uses. Note that this grade was formerly named Pebax® MP 1878 SA 01 resin. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.09 | g/cm³ | ISO 1183 |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
1.3 | % | ISO 62 |
23℃,24hr 23℃,24hr |
6.7 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ISO 868 | ||
邵氏 D Shaw's D |
58 | ISO 868 | |
邵氏 D,15 秒 Shore D, 15 seconds |
54 | ISO 868 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179 | ||
-40℃ -40℃ |
kJ/m² | ISO 179 | |
23℃ 23℃ |
ISO 179 | ||
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179 | ||
-40℃ -40℃ |
ISO 179 | ||
23℃ 23℃ |
ISO 179 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306 | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
德国最新权威民调:默克尔所在的联盟党支持率跌至历史最低点
2021-09-03 搜料网资讯: 当地时间9月2日晚,德国电视一台发布了最新一期德国趋势民意调查。结果显示,德国执政党、总理默克尔所在的联盟党支持率跌至新低;绿党支持率也延续了此前的下跌 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |