公司信息及水印
牌号简介 About |
---|
出于库存控制目的,产品名称后面可以跟一个X。标记为FEP 106和FEP 106 X的产品是等效的,本文件中的所有信息都适用于这两者。典型应用:小直径、薄壁电线和电缆绝缘。通过注射成型制造的复杂或薄壁零件。杜邦Teflon® FEP 106是一种不含添加剂的四氟乙烯和六氟丙烯的熔融加工共聚物,符合ASTM D 2116 II型的要求。它提供了特氟隆氟聚合物树脂的优良特性组合:无老化特性、化学惰性、优异的介电性能、耐热性、韧性和柔韧性、低摩擦系数、不粘特性、可忽略的吸湿性、低可燃性、在温度下的性能。极端气候条件和良好的耐候性。Teflon® FEP 106是特氟隆FEP的“高生产率”等级。它是专为挤压薄壁,小直径电线绝缘。也可用于复杂和薄壁零件的注塑成型。在加工温度下,它显示出低粘度和高临界剪切速率。在类似的线结构中,它可以以比通用级特氟隆FEP 100更高的挤出线速度挤出。应力抗裂性是确定最终使用性能的重要因素。经验表明,在树脂薄膜上进行的MIT耐折性或弯曲寿命试验与广泛的电缆试验建立了良好的相关性。MIT的弹性寿命越高,树脂的应力开裂抗力越高。麻省理工学院的测试结果应被视为不同等级树脂比较性能的指南。我们建议,对于涉及重复热循环和弯曲循环的应用,应始终对最终电缆进行特定测试。另请参见杜邦公告“电线和电缆应用的等级选择器”。 For inventory control purposes product name may be followed by an X. Products labeled FEP 106 and FEP 106 X are equivalent and all information in this document is applicable to both. Typical Application Small diameter, thin wall wire and cable insulations. Intricate or thin wall parts made by injection moulding. DuPont Teflon® FEP 106 is a melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116 type II. It offers the excellent combination of properties characteristic of Teflon® fluoropolymer resins: non-ageing characteristics, chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes and excellent weather resistance. Teflon® FEP 106 is a "high productivity" grade of Teflon® FEP. It is designed for the extrusion of thin wall, small diameter wire insulations. It can also be used for injection moulding of intricate and thin wall parts. At processing temperatures it shows low viscosity and a high critical shear rate. In similar wire constructions it can be extruded at higher extrusion line speeds than the general purpose grade Teflon® FEP 100. Stress-crack resistance is an important element in establishing end-use performance. Experience shows that the MIT folding endurance or flex life test, performed on a thin film of resin, has established a good correlation with extensive cable testing. The higher the MIT flex life, the higher the stress-crack resistance of the resin. MIT test results should be viewed as a guide to comparative performance of the various grades of resin. We recommend that for applications involving repeated thermal and flex cycling, specific tests on the final cable always should be undertaken. See also DuPont's bulletin "Grade selector for Wire and Cable applications". |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- |
2.13 | g/cm³ | ISO 1183 |
-- -- |
2.13 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
372℃,5.0kg 372℃,5.0kg |
22 | g/10min | ISO 12086 |
372℃,5.0kg 372℃,5.0kg |
22 | g/10min | ASTM D2116 |
吸水率 Water absorption rate |
|||
24hr 24hr |
< 0.010 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
邵氏 D Shaw's D |
ISO 868 | ||
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
屈服,23℃ Yield, 23 ℃ |
MPa | ISO 12086 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ISO 12086 | |
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
ASTM D256 | ||
23℃ 23℃ |
ISO 180 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
连续使用温度 Continuous use temperature 2 |
℃ | ||
熔融温度 Melting temperature 5 |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
|||
0.25 mm 0.25 mm 4 |
kV/mm | ASTM D149 | |
0.25 mm 0.25 mm |
kV/mm | IEC 60243-1 | |
介电常数 Dielectric constant |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
1.00 GHz 1.00 GHz |
ASTM D150 | ||
相对电容率 Relative permittivity |
IEC 60250 | ||
1 kHz 1 kHz |
IEC 60250 | ||
1.00 GHz 1.00 GHz |
IEC 60250 | ||
耗散因数 Dissipation factor |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
1 GHz 1 GHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
IEC 60250 | ||
1 kHz 1 kHz |
IEC 60250 | ||
1 GHz 1 GHz |
IEC 60250 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level 5 |
UL 94 | ||
极限氧指数 Extreme oxygen index |
% | ASTM D2863 | |
极限氧指数 Extreme oxygen index |
% | ISO 4589-2 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Critical Shear Rate(372℃) Critical Shear Rate(372℃) |
sec^-1 | Internal Method | |
Guide DDR Range(for cable extrusion) Guide DDR Range(for cable extrusion) |
|||
MIT耐折强度(film,200.0 µm) MIT flexural strength (film, 200.0 µ m) |
Cycles | ASTM D2176 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 The continuous service temperature is based on accelerated heat-aging tests, and represents the temperature at which tensile strength and ultimate elongation retains 50% of the original values, after 20 000 h thermal aging When considering the use of Teflon ® FEP at elevated temperatures especially in combination with mechanical, electrical or chemical exposure, preliminary testing should be done to verify suitability. |
3 ASTM D4591 / D3418 |
4 方法A(短时间) |
5 - These results are based on laboratory tests, under controlled conditions, and do not reflect performance under actual fire conditions. - Current rating is a typical theoretical value |
【新闻资讯】查看全部
耐克股价十年六倍仍跑输它的代工厂 代工企业竞争力不再只靠便宜劳动
2022-01-26 搜料网资讯: 长期投资者们会喜欢耐克。 过去的十年间,耐克股价涨幅超过六倍。对于投资者而言,这是相当可观的回报。 但如果他们选择了一家耐克的代工企业,结果会更加令人喜 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |