牌号简介 About |
---|
采用30%玻璃纤维增强尼龙6进行化学注射成型,增强了材料的强度和韧性。用于汽车、电子、机械和消费品行业的结构零件生产,如电动手持工具、业余爱好设备的支架、电气设备的外壳、齿轮、风扇的螺旋桨、电动机。无卤产品以天然形式或RAL标度的颜色提供。 With 30% glass fiber reinforced PA 6 for chemical injection molding has increased strength and toughness. Use in the production of structural parts in the automotive, electronics, machinery and consumer goods industry - eg Holders of electrical hand tools, hobby equipment, housing the electric equipment, gears, propellers for fans, electric motors. The halogen-free product is supplied in natural form or in the colors of the RAL scale. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.38 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
4.0 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
STM 64 0808 | ||
TD TD |
0.58 | % | STM 64 0808 |
MD MD |
0.46 | % | STM 64 0808 |
含水量 water content |
0.15 | % | ISO 960 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-2 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179 | ||
-20℃ -20℃ |
kJ/m² | ISO 179 | |
23℃ 23℃ |
kJ/m² | ISO 179 | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179 | ||
-20℃ -20℃ |
kJ/m² | ISO 179 | |
23℃ 23℃ |
kJ/m² | ISO 179 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/B | |
熔融温度 Melting temperature |
|||
DSC DSC |
℃ | ISO 3146 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | IEC 60243-1 | |
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
3.20 mm 3.20 mm |
UL 94 | ||
1.60 mm 1.60 mm |
UL 94 | ||
0.80 mm 0.80 mm |
UL 94 | ||
灼热丝起燃温度 Igniting temperature of the hot wire |
℃ | IEC 60695-2-13 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
尼龙为何要耐水煮?耐水煮尼龙如何着色?
2017-04-10 尼龙件应用很广,但是其着色的时候需要考虑颜料耐煮性能。那么,为什么尼龙件要煮呢?耐煮尼龙如何着色? 一、对于尼龙件用水煮的原因分析: 1 、我们常用的尼龙是是尼龙6(PA6)、尼龙66(PA66),是一种结晶性热塑性材料; 2、 尼龙材料容易吸水,含有亲水基(酰氨基)。 对结晶性聚合物而言,在注塑加工时,很迅速的冷却使得材料无法自然结晶定型,从而使材料内部存在较强的内应力。没有经过“回火”处理的尼龙料,其内部因为在定型后,大分 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |