牌号简介 About |
---|
UTEC 3041 UTEC3041是一种超高分子量聚乙烯,其分子量约为高密度聚乙烯(HDPE)树脂的10倍。这种极高的分子量使这种聚合物具有几种独特的性能,如高耐磨性、冲击强度和低摩擦系数,使其成为一种自润滑材料。应用:要求高抗冲击性和使用颜料和/或添加剂的应用-技术和多孔零件、过滤器、压缩成型板。UTEC 3041描述:UTEC3041是一种分子量约为高密度聚乙烯(HDPE)树脂10倍的超高分子量聚乙烯。这种极高的分子量使这种聚合物具有几种独特的性能,如高耐磨性、冲击强度和低摩擦系数,使其成为一种自润滑材料。应用:要求高抗冲击性和使用颜料和/或添加剂的应用-技术和多孔零件、过滤器、压缩成型板。 UTEC 3041 UTEC3041 is an Ultra High Molecular Weight Polyethylene with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance and impact strength and low coefficient of friction, what makes it a self-lubricating material. Applications: Applications which require high impact resistance and use of pigments and/or additives - technical and porous parts, filters, compression molded sheets. UTEC 3041 UTEC3041 is an Ultra High Molecular Weight Polyethylene with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance and impact strength and low coefficient of friction, what makes it a self-lubricating material. Applications: Applications which require high impact resistance and use of pigments and/or additives - technical and porous parts, filters, compression molded sheets. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.925 | g/cm³ | ASTM D792 |
表观密度 Apparent density |
0.45 | g/cm³ | ASTM D1895 |
吸水率 Water absorption rate |
|||
饱和 saturated |
0.010 | % | ASTM D570 |
分子量 molecular weight |
|||
Average Average |
3000000 | g/mol | 内部方法 |
固有粘度 Intrinsic viscosity |
14 | dl/g | ASTM D4020 |
颗粒大小 Particle size |
|||
Average Average |
µm | ASTM D1921 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
kJ/m² | ISO 11542-2 | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/A, ASTM D1525 3 | |
熔融峰值温度 Melting peak temperature |
℃ | ASTM D3418 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:-30~100℃ MD:-30~100℃ |
1/℃ | ASTM D696 | |
比热 specific heat |
|||
23℃ 23℃ |
J/kg/℃ | ASTM E1269 | |
导热系数 Thermal conductivity coefficient |
|||
23℃ 23℃ |
W/m/K | ASTM C177 | |
比热焓 Specific enthalpy |
Btu/lb | ASTM D3418 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
1 kHz 1 kHz |
ASTM D150 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ASTM D2240, ISO 868 | ||
邵氏 D Shaw's D |
|||
邵氏 D,15 秒 Shore D, 15 seconds |
|||
拉伸强度 tensile strength |
ASTM D638, ISO 527-2 | ||
屈服 yield |
MPa | ||
断裂 fracture |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
断裂 fracture |
% | ISO 527-2 | |
摩擦系数 friction coefficient |
ASTM D1894 | ||
与自身 - 动态 With oneself - dynamic |
|||
与自身 - 静态 With oneself - static |
|||
磨耗量 Wear amount |
内部方法 | ||
-- -- 1 |
|||
-- -- 2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Dp50 |
3 Reference ISO 15527 = 100 |
4 Reference Stainless Steel SAE1020 = 100 |
5 Determined with double-notched specimens (14° v-notch on both sides) in accordance with ISO 11542-2. |
6 压 力1 (10N) |
7 reference ISO 15527 = 100 |
8 reference Stainless Steel SAE1020 = 100 |
【新闻资讯】查看全部
第25届Fakuma展会行将盛大举行
2017-10-16 10月17-21日,第25届Fakuma展会即将隆重举行! 尽管展会规模不及K展,Fakuma仍是数一数二的欧洲塑料加工业盛事,云集尖端工艺。今届展会,约有1,700家来自35个不同国家的展商参加,占地超 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |