牌号简介 About |
---|
聚丁二醇丁二酸酯(PBS)是以丁二酸和丁二醇为原料,经直接缩聚反应合成的一种完全可生物降解的高分子聚合物。在特定条件下,该材料最终可以安全、无害地分解成简单的化合物,如CO2、H2O等,PBS具有良好的热稳定性、良好的机械性能和加工性能等优势。可在普通塑料加工设备上进行成型加工。由于其优异的综合性能,还可以与其他完全可生物降解的塑料材料混合改性,以满足塑料制品的各种制造要求。 Poly (1, 4-butanediol Succinate) (hereunder PBS) is a kind of fully biodegradable macromolecular polymer that is synthesized from succinic acid and butanediol through a direct process of condensation polymerization. On specific conditions, this material can be finally decomposed safely and innoxiously into simple compounds such as CO2, H2O, etc. PBS has predominant characteristics such as good thermal stability, fine mechanical and processing performance. It can be molding processed in normal plastic fabrication apparatus. Because of its excellent integrated performance, it also can be blended with other fully biodegradable plastic materials to modify the property to satisfy all kinds of manufacturing requirements of plastic products. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.15 到 1.25 | g/cm³ | |
熔体质量流动速率 Melt Flow Rate |
> 15 | g/10min | |
灰份含量 Ash Content |
< 0.50 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
> 20.0 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
> 200 | % | |
弯曲模量 Bending modulus |
MPa | ||
弯曲强度 bending strength |
MPa | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
℃ | ||
熔融温度 Melting temperature |
℃ | ||
热变形温度 Hot deformation temperature |
℃ | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Loss on Drying Loss on Drying |
% |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
模具温度对注塑成型的影响
2017-01-05 一个热的模具表面使塑料表面长时间保持液态,足以在型腔内形成压力。如果型腔填满而且在冻结的表皮出现硬化之前,型腔压力可将柔软的塑料压在金属上,那么型腔表面的复制就高。另一方面,如果在低压下进入型腔的塑料暂停了,不论时间多短,那么它与金属的轻微接触都会造成污点,有时被称为浇口污斑。 对于每一种塑料和塑胶件,存在一个模具表面温度的极限,超过这个极限就可能出现一种或更多不良影响(例如:组件可以溢出毛边)。模具温度更高意味着流动阻力更小。在许多注塑机上,这自然就意味着更快流过浇、浇口 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |