牌号简介 About |
---|
BC 7009-2是一种充铁、低成本的大型铸造系统。建议用于铸造至少2英寸和最多6英寸的非导电模具。厚度达到9英寸的金属或导电型模具也可以成功实现。适用于拉伸成型、图案、模具、模具、复制品、原型等。 BC 7009-2 is an iron oxide filled, low-cost mass casting system. Recommended for use in casting a minimum of two inches and a maximum of six inches in non-conductive molds. Thicknesses to nine inches in metal or conductive-type molds can successfully be achieved as well. Ideal for stretch forms, patterns, dies, molds, duplications, prototypes, etc. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- |
2.26 | g/cm³ | ASTM D792 |
-- -- |
2.27 | g/cm³ | ASTM D1505 |
收缩率 Shrinkage rate |
|||
MD MD |
0.090 | % | ASTM D955 |
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脱模时间 stripping time |
|||
24℃ 24℃ |
1400 到 2200 | min | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化温度 curing temperature |
24 | ℃ | |
固化时间 Curing time |
day | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
极限 limit |
MPa | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
断裂 fracture |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
储存稳定性 storage stability |
|||
24 ℃ 24 ℃ |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
亨斯迈任命Curtis E. Espeland和José Muoz为董事会成员
2022-01-06 搜料网资讯: 亨斯迈宣布已任命Curtis E. Espeland和Jos Muoz为董事会成员。此外,公司宣布已任命Cynthia L. Egan为新的首席独立董事、董事会非执行副主席兼提名和公司治理委员会主席,并增 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |