牌号简介 About |
---|
INSULGEL 90是室温固化,透明,环氧凝胶,其中凝胶数实际上等于硬度。INSULGEL 90是低粘度的,通常不需要真空除气来消除铸件和嵌入物的空隙。 INSULGEL 90 is a room temperature curing, transparent, epoxy gel in which the gel number actually equals the hardness. INSULGEL 90 is low viscosity and does not normally require vacuum de-gassing to void-free castings and imbedments. |
技术参数 Technical Data | |||
---|---|---|---|
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
1.0E+14 | ohms·cm | ASTM D257 |
介电强度 Dielectric strength |
15 | kV/mm | ASTM D149 |
介电常数 Dielectric constant |
|||
1 kHz 1 kHz |
3.50 | ASTM D150 | |
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
0.020 | ASTM D150 | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 2 |
Amber | ||
-- -- 3 |
|||
密度 Density |
|||
-- -- 2 |
g/cm³ | ||
-- -- 3 |
g/cm³ | ||
粘度 viscosity |
ASTM D2393 | ||
-- -- 2 |
Pa·s | ASTM D2393 | |
-- -- 4 |
Pa·s | ASTM D2393 | |
-- -- 3 |
Pa·s | ASTM D2393 | |
固化时间 Curing time |
|||
25℃ 25℃ |
hr | ||
储存稳定性 storage stability |
|||
25 ℃ 25 ℃ |
min | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
使用温度 Operating temperature |
℃ | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
贮藏期限 Storage period |
|||
25℃ 25℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Part B |
3 Part A |
4 Mixed |
【新闻资讯】查看全部
普立万推出新型TPE
2021-05-23 搜料网资讯: 近日,普立万宣布,该公司推出reSound OM二次成型热塑性弹性体(TPE),标志着其可持续解决方案系列产品再添新成员。据悉,新产品采用了从甘蔗中提取的生物可再生成分, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |