牌号简介 About |
---|
应用汽车发动机罩下测试流体流动和可视化进气歧管设计分析和验证冷却液流动分析加热空气管道模型传动流体流动分析电子控制原型航空航天风洞模型高刚度模型长寿命原型具有温度恒定至130°C(266°F)高湿度和抗湿性高刚性低粘度配方的优点适用于高温测试,随着时间的推移机械性能稳定零件在潮湿环境中保持模量延长零件寿命零件强度和保持形状快速重涂和清洁 Applications Automotive Testing Under the hood Fluid flow and visualization Intake manifold design analysis and verification Coolant flow analysis Heating Air duct models Transmission fluid flow analysis Electronic controls prototypes Aerospace wind tunnel models High rigidity models Long lived prototypes Features Temperature reistant to 130°C (266°F) High humidity and moisture resistance High rigidity Low viscosity formulation Benefits Suitable for high temperature testing Stable mechanical properties over time Parts maintain modulus in humid environments Extended part life Parts are strong and maintain shape Fast recoating and cleaning |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- 2 |
1.17 | g/cm³ | |
-- -- 3 |
1.23 | g/cm³ | |
粘度 viscosity |
|||
30℃ 30℃ |
0.2 到 0.25 | Pa·s | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
22 到 29 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed 4 |
65.0 | ℃ | ASTM D648 |
0.45 MPa,未退火 0.45 MPa, unannealed 5 |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed 4 |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed 5 |
℃ | ASTM D648 | |
玻璃化转变温度 Glass transition temperature |
ASTM D4065 | ||
-- -- |
℃ | ASTM D4065 | |
-- -- 5 |
℃ | ASTM D4065 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
ASTM E831 | ||
< 50℃ < 50℃ |
cm/cm/℃ | ASTM E831 | |
> 120℃ > 120℃ |
cm/cm/℃ | ASTM E831 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Critical Exposure Critical Exposure |
mJ/cm² | ||
渗透深度 Penetration depth |
µm | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Liquid, 25°C |
3 Solid, 25°C |
4 UV + Thermal Postcure (2 hr @ 160 °C) |
5 UV Postcure Only |
【新闻资讯】查看全部
2018年6月中国初级外形的塑料产量为679.5万吨
2018-08-21 2018年6月中国初级形态的塑料产量为679.5万吨,与去年同期相比增长3.2%,1-6月全国初级形态的塑料产量为4146.7万吨,与去年同期相比增长4.8%。 中商产业研究院数据库分地区来看,2018年上半年全国初级形态的塑料产量前十省市分别是江苏省、浙江省、山东省、新疆区、广东省、内蒙古、陕西省、上海市、辽宁省和福建省。其中,江苏省上半年初级形态的塑料产量为485.27万吨,累计同比下降24.18%,但仍是上半年全国初级形态的塑料产量第一。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |