牌号简介 About |
---|
BorPure™ MB7541是一种双峰高密度聚乙烯,用于注塑和压缩成型。这一等级结合了良好的感官性能,环境应力抗裂性和优越的流动性能和良好的冲击强度,即使在低温。改进的加工性能,即使在较低的熔化温度下,也可以节省能源和更快的循环时间。 BorPure MB7541 is a bimodal, high-density polyethylene intended for injection and compression moulding. This grade combines excellent organoleptic properties, environmental stress crack resistance and superior flow properties with good impact strength even at low temperatures. The improved processability, even at low melt temperature, allows energy savings and faster cycle time. Applications Caps and closures for Beverage food and Industrial packaging Transport packaging Consumer and industrial articles for demanding environment Special features Good organoleptic properties Good stress crack resistance Good impact strength |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.954 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
4.0 | g/10min | ISO 1133 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
10%非离子洗涤剂,F50 10% non-ionic detergent, F50 |
40.0 | hr | ASTM D1693B |
全切口蠕变试验 Full incision creep test 2 |
|||
50℃ 50℃ 2 |
1.3 | day | ISO 16700 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
61 | ISO 868 | |
拉伸模量 Tensile modulus |
MPa | ISO 527-1-2 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2/50 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ISO 527-2/50 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸冲击强度 Tensile impact strength |
|||
23℃ 23℃ |
kJ/m² | ISO 8256/1A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 3.5 MPa, Arcopal N110 2% |
【新闻资讯】查看全部
美国市场调研机构发布研讨报告
2019-01-31 美国市场调研机构“大视野研究公司”在近期发布的研究报告中预计,到2025年,全球注塑机市场规模有望达到224.5亿美元,2017~2025年的复合年增长率将在3.5%左右。 报告指出,对轻型和复杂的汽车与电子部件的需求日益增长,势必刺激市场对注塑机的需求。工业化的不断发展、技术的进步、迅速的城市化和基础设施的增长也将提振对注塑机的需求。 预测期内,汽车、消费品和电子行业的大规模生产将推动全球注塑机市场的发展。注塑机市场按材料分为塑料注塑机和金属注塑机两大类。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |