牌号简介 About |
---|
QC-8560是一种乙烯基酯基片状模塑料(SMC),设计用于需要高结构强度的部件的压缩成型。它在125°C以上的温度下保持良好的机械性能,并能承受300°C以上的短期暴露。 QC-8560 is a vinyl ester based sheet molding compound (SMC) designed for compression molding of components requiring high structural strength. It maintains excellent mechanical properties at temperatures above 125°C, and will withstand short term exposures at over 300°C. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.90 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.050 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
26900 | MPa | ASTM D638 |
拉伸强度 tensile strength |
262 | MPa | ASTM D638 |
弯曲模量 Bending modulus |
ASTM D790 | ||
-- -- |
MPa | ASTM D790 | |
116℃ 116℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
ASTM D790 | ||
-- -- |
MPa | ASTM D790 | |
116℃ 116℃ |
MPa | ASTM D790 | |
压缩模量 Compression modulus |
MPa | ASTM D695 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
℃ | ASTM E1356 | |
贮藏期限 Storage period |
|||
24℃ 24℃ |
wk | ||
脱模时间 stripping time |
|||
135℃ 135℃ |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
热塑性聚酯弹性体TPEE、COPE性能简介
2020-11-03 搜料网资讯: 热塑性聚酯弹性体简称TPEE或COPE,是一类含有PBT(聚对苯二甲酸丁二醇酯)聚酯硬段(结晶相)和脂肪族聚酯或聚醚(非晶相)软段的线型嵌段共聚物。 TPEE属于高性能工程 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |