牌号简介 About |
---|
VA-286是一种坚硬、耐热的聚氨酯,适用于真空辅助铸造系统和短模具周期。不使用汞、MOCA或TDI,可获得优异的物理性能。VA-28的凝胶时间比VA-255长,允许较大的铸件。VA-286易于着色。 VA-286 is a tough, heat-resistant polyurethane formulated for vacuum assisted casting systems and short mold cycle times. Excellent physical properties can be obtained without the utilization of mercury, MOCA, or TDI. VA-286 has a longer gel time than VA-285, allowing for larger castings. VA-286 can be easily pigmented. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
Hardener Hardener |
1.13 | g/cm³ | |
固化处理 Curing treatment |
1.20 | g/cm³ | |
基体树脂 Matrix resin |
1.25 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 到 0.50 | % | ASTM D2566 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲模量 Bending modulus |
2520 | MPa | ASTM D790 |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
粘度 viscosity |
|||
38℃ 38℃ 1 |
Pa·s | ||
38℃ 38℃ 2 |
Pa·s | ||
38℃ 38℃ 3 |
Pa·s | ||
固化时间 Curing time 4 |
hr | ||
胶凝时间 Gelation time |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
脱模时间 stripping time |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Resin |
3 Mixed |
4 Hardener |
5 24 hours at 77°F + 1 hour at 150°F |
【新闻资讯】查看全部
塑料企业不时被淘汰 不外乎这几大要素
2017-08-10 从2014年上半年开始,不断有塑企被淘汰,这是为什么呢?其实,除了一些外部因素之外,这些倒闭的塑企都有共同的特点,而且其倒闭的原因十分惊人地相似: 塑料企业不断被淘汰不外乎这几大因素 1.这些被淘汰的塑企的技术、管理水平非常落后,一直都是凭经验做事,跟着问题后面跑; 2.这些塑企的经营思路二十几年都没变,管理混乱、生产效率低、料耗大、机位人手多、生产成本高; 3.其塑料原料的品质和交期经常达不到客户的要求,生产订单逐步减少;< |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |