牌号简介 About |
---|
IE-80A是一种半柔性聚氨酯弹性体,用于手工批量或真空辅助加工。无需使用汞、MOCA或TDI,室温固化即可获得优良的物理性能。 IE-80A is a semi-flexible polyurethane elastomer formulated for hand-batch or vacuum assisted processing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or TDI. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
Hardener Hardener |
1.04 | g/cm³ | |
固化处理 Curing treatment |
1.09 | g/cm³ | |
基体树脂 Matrix resin |
1.20 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 到 0.50 | % | ASTM D2566 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
按重量计算的混合比: 35 按容量计算的混合比: 30 | ||
硬化法 Hardening method |
|||
脱模时间 stripping time |
min | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
粘度 viscosity |
|||
25℃ 25℃ 2 |
Pa·s | ||
25℃ 25℃ 3 |
Pa·s | ||
25℃ 25℃ 4 |
Pa·s | ||
固化时间 Curing time |
|||
25℃ 25℃ |
hr | ||
胶凝时间 Gelation time |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
撕裂强度 tear strength |
kN/m | ASTM D624 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Resin |
3 Mixed |
4 Hardener |
【新闻资讯】查看全部
PA的功能和注塑加工工艺
2017-06-19 本文介绍了工程塑料PA的性能和注塑加工工艺,实际生产中设备的选用、产品造型及模具设计的注意事项。 PA―聚酰胺、也称尼龙, 是一大类酰胺型聚合物的统称。 最常见的有PA6、PA66、PA1010。 最近,随着IT业的发展,一种新型的聚酰胺―PA46的使用量剧增,它用于代替LCP(液晶聚合物)生产电脑上的插件。由于PA具有良好的机械性能,韧性好、抗冲击、耐磨、自润滑、阻燃、绝缘等特点,所以被广泛用于汽车、机械、电子、仪表、化工等 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |