牌号简介 About |
---|
Technother® A-SV30-ODI是一种聚丁烯对苯二甲酸酯(PBT)产品,。 它,在欧洲有供货。 Technother® A-SV30-ODI is a Polybutylene Terephthalate (PBT) product. It is available in Europe. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.68 | g/cm³ | |
收缩率 Shrinkage rate |
0.40 到 0.80 | % | |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
0.20 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
145 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
2.0 | % | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ||
弯曲强度 bending strength |
MPa | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
熔融温度 Melting temperature |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ||
体积电阻率 Volume resistivity |
ohms·cm | ||
介电强度 Dielectric strength |
|||
2 mm 2 mm |
kV/mm | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
灼热丝起燃温度 Igniting temperature of the hot wire |
℃ | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Burn Resistant Category Burn Resistant Category |
|||
Trekingostoykost(KIT) Trekingostoykost(KIT) |
cm |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
厦门:36万盏吸顶灯被召回 原来是塑料挂钩惹的祸
2017-04-13 近日,记者从厦门海沧检验检疫局获悉,今年一季度,该局连续接到厦门某灯饰照明公司出口吸顶灯退运调查报检,申报退运原因皆为产品安装后存在掉落危险,涉及HYBY、LOCK及RINNA三款吸顶灯。瑞典宜家作为产品的设计方,决定在全球范围内主动召回36万盏相关吸顶灯。 对此,海沧局工作人员主动联系该企业相关人员开展现场退运调查,通过对退运货物的勘验、鉴定,以及宜家收到的吸顶灯掉落引发用户受伤的报告,确认原因为固定吸顶灯玻璃灯罩的塑料挂钩可能发生断裂,导致玻璃灯罩掉落,从而造成用户被割 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |