牌号简介 About |
---|
一种具有高精度和优良表面光洁度的阻燃PA12材料。非常适合直接生产航空航天、运输和消费品,需要可靠的阻燃性和减少烟雾和毒性。特点FAR 25.853合格的通过AITM烟密度和毒性要求制造非卤化配方所需的高精度和可重复性优良的表面质量效益通过添加剂制造实现的重量优化设计降低燃油成本加速在役飞机ELIMIN的座舱设计变化在12秒和60秒暴露条件下,ATE工具和最大限度地减少备件库存成本具有优异的阻燃性应用程序直接3D生产需要阻燃性的飞机内部零件汽车和运输相关零件,其中可能需要消防安全的消费电子产品和其他商品。 A flame-retardant PA12 material with high accuracy and excellent surface finish. Ideally suited for direct production of aerospace, transportation and consumer goods application where reliable fire retardancy and reduced smoke and toxicity are required. Features FAR 25.853 compliant Passes AITM smoke density and toxicity requirements High accuracy and repeatability needed for manufacturing Non-halogenated formulation Excellent surface quality Benefits Reduce fuel costs with weight optimized design enabled by additive manufacturing Accelerate changes in cabin designs for in service aircraft Eliminate tooling and minimize spare part stocking costs Excellent flame retardancy at 12 and 60 second exposures Applications Direct 3D production of aircraft interior parts Parts requiring flame retardancy Automotive and transportion related parts where fire safety may be needed Consumer electronics and other goods |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 2 |
1.02 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
平衡 balance |
0.29 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,3mm 23℃,3mm |
25 | J/m | ASTM D256 |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃,3.05 mm 23℃,3.05 mm |
230 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
180 | ℃ | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:0~145℃ MD:0~145℃ |
1/℃ | ASTM E831 | |
比热 specific heat |
|||
23℃ 23℃ |
J/kg/℃ | ||
50℃ 50℃ |
J/kg/℃ | ||
100℃ 100℃ |
J/kg/℃ | ||
150℃ 150℃ |
J/kg/℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM E1530 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
1 kHz 1 kHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
断裂 fracture |
MPa | ASTM D790 |
备注 |
---|
2. Sintered Part |
【新闻资讯】查看全部
青海省通报2020食品相关产品质量省级监督抽查情况
2021-02-07 搜料网资讯: 2021年1月29日,青海省市场监督管理局网站通报2020年食品相关产品质量省级监督抽查情况, 共抽查了33家生产企业、经销单位的82批次产品,经检验,所抽样品质量均为合格 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |