牌号简介 About |
---|
标准型,中等粘度,部分芳香族聚酰胺,玻璃纤维含量50%,热稳定。适用于热稳定性高、吸水率低的各种注塑件。 Standard type with medium viscosity partly aromatic Polyamid with 50% glass fiber content and heat stabilized. For all kind of injection mlouding parts with high stiffness at exellent thermal stability and low moisture absorption. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.64 | g/cm³ | |
吸水率 Water absorption rate |
|||
饱和,23℃ Saturation, 23 ℃ |
3.0 | % | |
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
1.3 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
19000 | MPa | |
拉伸强度 tensile strength |
|||
断裂 fracture |
260 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ||
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
熔融温度 Melting temperature 2 |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ||
TD TD |
1/℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ||
相比漏电起痕指数 Compared to the leakage tracing index |
V | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
可燃性等级 Flammability level |
|||
1.6 mm 1.6 mm |
备注 |
---|
2. 10°C/min |
【新闻资讯】查看全部
1-7月,俄罗斯PP产量到达82.9万吨
2018-08-24 据安迅思新闻莫斯科8月20日消息,据MRC ScanPlast报告,今年1-7月,俄罗斯聚丙烯(PP)产量同比下降1%。 7月份俄罗斯PP产量增加至12.5万吨,上月为11.46万吨,主要是Nizhnekamskneftekhim、 Polyom和Sibur Tobolsk公司增加了产量。 今年1-7月,俄罗斯PP产量达到82.9万吨,去年同期为83.78万吨。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |