牌号简介 About |
---|
高性能热塑性材料,无增强聚醚醚酮(PEEK),半结晶,压缩成型用细粉末,易流动,符合FDA食品接触标准,颜色自然。 High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, fine powder for compression moulding, easy flow, FDA food contact compliant, colour natural. |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
4100 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
100 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
15 | % | ISO 527-2 |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
3.90 | MPa | ISO 178 |
弯曲强度 bending strength |
|||
23℃ 23℃ |
170 | MPa | ISO 178 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
kJ/m² | ISO 180-A | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
ISO 180 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
ISO 11357-2 | ||
-- -- |
℃ | ISO 11357-2 | |
-- -- |
℃ | ISO 11357-2 | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
压缩成型温度 Compression molding temperature |
℃ | ||
干燥温度 drying temperature |
|||
Compression molding Compression molding |
℃ | ||
干燥时间 drying time |
|||
Compression molding Compression molding |
hr | ||
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
g/cm³ | ISO 1183 | |
表观密度 Apparent density |
g/cm³ | ISO 1183 | |
平均粒径 Average particle size |
|||
d50 d50 |
µm | ISO 13320-1 | |
熔体表观粘度 Apparent viscosity of melt |
|||
400℃ 400℃ |
Pa·s | ISO 11443 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Onset |
3 Midpoint |
【新闻资讯】查看全部
汽车内外饰件市场潜力大 车用塑料运用力度攀升
2017-05-05 近年来,随着塑料工业的快速发展,相关功能塑料物理性能提升,其产品强度、可靠性也随之提高。大量高强度性能塑料零部件在汽车制造业的使用,替代了部分金属零部件,以实现整车轻量化和节能减排目标。塑料在汽车上大规模应用是化工工业不断进步、汽车节能与安全水准不断提高的结果。业内统计数据显示,2011年中国汽车塑料内外饰件行业市场规模为4342.30亿元,到2016年市场规模增长至6117.65亿元。 塑料在汽车上的应用研究兴起于20世纪50年代。20世纪60年代中期已有少量塑料件商业化 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |